Filter
Top Products
6
BEFORE FIRST USE
1. Unwrap product and remove any packaging materials that may have
been included to prevent damage during shipping.
2. Place on a flat, stable surface, approximately in the center (front to
back) of counter-top..
3. Before using for the first time, the cooking basket and drip tray should
be washed with warm soapy water. Rinse and dry.
4. Insert drip tray (Fig. 1). Always have drip tray in place before using
(Fig. 2).
5. Read instruction book thoroughly to become familiar with the
UltraVection™ Oven.
NOTE: A slight odor or smoking from the interior of the UltraVection™
Oven may be noticed when first using. This is normal due to residues from
manufacturing.
SETTING THE CLOCK
1. Plug unit into 120V ~ 60Hz outlet. 12:00 will show on the display and
the colon will blink.
2. Press the CLOCK SET button. The colon will stop blinking.
3. Press the UP ARROW or DOWN ARROW to select the time.
4. Press the START button, the colon will blink. The time will now be dis-
played and you will exit the clock setting mode.
NOTE: The instructions have been written with the clock set. However, the
clock does not have to be set before using the oven. Just push function but-
ton(s), select cooking time(s), then START.
USING YOUR OVEN
The UltraVection™ Oven cooks using super heated air movement.
Therefore, the outside of the oven and the glass door become hot. Always
use caution when touching these parts and never use the top of your oven
as a resting-place for anything. We recommend using a potholder or insu-
lated mitt to remove the air surround basket after cooking. Foods become
hot during the cooking process. Allow to cool slightly before serving.
Always preheat oven before using unless chart or recipe indicates other-
wise.
1. Plug into 120V ~ 60Hz outlet. Set the clock.
W
A
R
M
T
O
A
S
T
F
R
O
Z
E
N
P
IZ
Z
A
PRE
HE
AT
B
R
O
W
N
T
U
R
B
O
P
o
w
e
r
O
n
Fig. 1
Fig. 2