Filter
Top Products
Transition Networks SDSFE31xx-100 Industrial Device Server
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
viii
Cautions and warnings
Cautions and
warnings
Make sure that you read and understand all content identified by these two symbols:
Cautions and warnings appear here and throughout this manual where appropriate.
Failure to read and understand the information identified by the “caution” and
“warning” symbols could result in poor equipment performance, damage to
equipment, or injury to persons.
Cautions
Cautions indicate the possibility of damage to equipment.
CAUTION
Make sure that the Device Server is mounted with proper space around it for
ventilation (heat dissipation). Failure to observe this caution could result in
damage to the Device Server.
CAUTION
Please exercise caution when using power tools. Do not install this unit in damp
or wet locations, or in close proximity to very hot surfaces. Failure to observe
this caution could result in damage to the Device Server and cables.
CAUTION
Only qualified persons should install the Device Server. Failure to observe this
caution could result in poor performance or damage to the Device Server.
CAUTION
Install the Device Server in an environment where the temperature range is from
0ºC to 70ºC (32º to 158º F), with relative humidity of 5% to 90%, non-
condensing. Failure to observe this caution could result in poor Device Server
performance.
CAUTION
DO NOT install the Device Server in areas where strong electromagnetic fields
(EMF) exist. Failure to observe this caution could result in poor Device Server
performance and data corruption.
CAUTION
The Device Server must be mounted to a well-grounded surface. Failure to
observe this caution could result in EMI problems.
Continued on next page