Filter
Top Products
Transition Networks SDSFE31xx-100 Industrial Device Server
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
38
Configuration software, continued
SNMP
configuration
menu
Click the SNMP config
link to show its two submenus:
• SNMP Communities
• IP Trap Manager
SNMP
communities
submenu
Click the “SNMP Communities
” link to launch the SNMP Communities submenu
option. See Figure 39.
Figure 39: SNMP Communities Display
Use an external SNMP-based application to configure and manage the Device
Server. This management method requires the SNMP agent on the Device Server and
on the SNMP network management station (NMS) to use the same community
string. This management method uses two community strings: “get” community
string and “set” community string:
• If the SNMP NMS knows the “Set” community string, it can read and write to the
MIBs.
• If it only knows the “Get” community string, it can only read MIBs.
The default get and “Set” community strings for the Device Server are “public” and
“private” respectively.
When new parameters are assigned, click the SAVE button to implement the new
settings. Click the RESET button to restore the original parameters if the changes
have not been saved.
Continued on next page