Filter
Top Products
SDSFE31xx-100 Industrial Device Server Transition Networks
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
53
Creating virtual COM ports, continued
Step Action
4. On the Serial IP Control Panel, enter the IP address and port number of
the Device Server. See Figure 55.
5. Check “user credentials” and select “use credentials below” from the
pulldown menu. See Figure 55.
Note: If a user name and password were set when setting up the Device Server, use
that same user name and password here.
6. Enter a “user name” and “password” if previously set. See Figure 55.
Figure 55: Virtual Port Configuration
Continued on next page