Filter
Top Products
VII. INTELA-TRAUL
®
(continued)
-14-
VII. l - SETTING THE DATE:
The date must be set in order for the data storage memory to correctly log events. Follow the instruc-
tions to enter the customer access code on page 9. When the control displays Thermostat
Set Point High, press the down arrow key until the control display reads Date. Press
the set button . The display will show (year). The right two numbers will be flashing.
Press the arrow keys to set the year. When the correct year is displayed, press the set
button . The display will show (month). The right two numbers will be flashing. Use
the arrow keys to set the month. When the correct month is displayed, press the set
button . The display will show (day). The right two numbers will be flashing. Press
the arrow keys to set the day. When the correct day is displayed, press the set button
. The display will then read Thermostat Set Point High. You can use the up or down
arrow keys to scroll to the next parameter, press the alarm cancel button to exit .
VII. m - SETTING DAYLIGHT SAVINGS TIME:
This parameter is preset at the factory to automatically adjust the 24-hour clock for Daylight Savings
Time. Follow the instructions to enter the customer access code on page 9. When the control dis-
plays Thermostat Set Point High, press the down arrow key until the display reads
Daylight Savings Time. Press the set button . The display will show Day-
light Savings Time (Yes, automatically adjust for Daylight Savings Time). For “YES” press the set
button , for “NO” press the up or down arrow key . The display will read
Dayligt Savings Time (no). Press the set button . The display will read Thermostat
Set Point High. You can press the the up or down arrow keys to scroll to the next param-
eter or press the alarm cancel button to exit .
SET
SET
SET
SET
)
)
)
SET
SET
SET
)
)
)