Tricity Bendix SE210/1W Cooktop User Manual


 
16
IMPORTANT SAFETY REQUIREMENTS
Important
This cooker must be installed in
accordance with the IEE Wiring
Regulations (Current Edition). Detailed
recommendations are contained in the
following British Standards Codes Of
Practice:
B.S. 6172/ B.S. 5440, Par.2 and B.S. 6891
Current Editions.
LOCATION
It is essential that the appliance is positioned
as in the enclosed figure i.e. shelves, wall
cabinets and cooker hoods must be fitted a
minimum of 690mm directly above the top of
hotplate and 400mm above the hotplate
when fitted in line with the outside of the
appliance. If the units are intended to be
fitted adjacent to the appliance but less than
400mm above the hotplate, then a minimum
space of 100mm must be maintained
between the sides of the unit and the
appliance (see fig).
If fitted next to or between two base units a
minimum space of 1mm must be left
between each unit and the sides of the
appliance. The levelling feet fitted to the
appliance will achieve a nominal height to
hotplate of 900mm+10mm.
The appliance must be installed in
accordance with EN 1116-1995, regarding
the depth of the superior furniture.
690
400
min 600
max 400
min 570
690
less than
400
100
C
2
1
3
4
5
6
7
8
G
C
2
1
3
4
5
6
7
8
G