Filter
Top Products
HINTS AND TIPS
TO REDUCE HOB SOILAGE:
Make sure the bottom of the saucepan and the
cooking area are clean and dry before cooking
begins.
Ensure saucepans are large enough to
accommodate food to avoid boil overs.
If possible, wipe up spills and splatters as they
occur, but take care to avoid steam burns.
Avoid using a dishcloth or sponge to clean the
hob. These may leave a layer of soiled detergent
on the hob surface which will burn and discolour
the next time the hob is used.
Avoid the use of:
Household detergents and bleaches.
Impregnated plastic or nylon pads not
described as suitable for non-stick
saucepans.
Brillo pads, Ajax pads, steel wool pads.
Chemical oven cleaners, e.g. aerosols and
oven pads.
Rust stain, bath and sink stain removers.
Any of the above products may cause
damage to the hob.
It is dangerous to mix different cleaning products.
The chemicals in them may react with each
other with hazardous results.
SOILAGE FROM SUGAR SOLUTIONS MUST
BE REMOVED FROM THE HOB BEFORE THE
SYRUP HAS SET OTHERWISE DAMAGE TO
THE HOB SURFACE WILL OCCUR.
Avoid placing plastic items, aluminium foil or
dishes on the hot surface as this will cause
damage to the hob.
CLEANING THE OUTSIDE OF THE
COOKER
DO NOT use abrasive cleaning materials or scourers
on the outside of the cooker as some of the finishes
are painted and damage may occur. Regularly wipe
over the control panel, oven doors and cooker sides
using a soft cloth and liquid detergent.
DO NOT ATTEMPT TO REMOVE ANY OF THE
CONTROL KNOBS FROM THE PANEL AS THIS
MAY CAUSE DAMAGE AND IS A SAFETY
HAZARD.
Remove all shelves and furniture from the oven. Hold
the bottom of the wirework runners and draw the
runners towards the centre of the oven. Unhook from
the top and remove.
Clean the wirework runners by soaking in very hot
soapy water, mild abrasives may be used.
To replace, hook the wirework side runner into the
cavity, slide back and press into place. Ensure the
wirework runners are firmly in position before
replacing the oven shelves.
29
BRACKET
REMOVING AND REPLACING WIREWORK
SIDE RUNNERS
CAVITY CENTRE