Filter
Top Products
............ www.truemfg.com ............
True Food Service Equipment, Inc.
10 10
INSTALLATION / OPERATION INSTRUCTIONS
SHELVING INSTALLATION (COLD DELI)
SHELF INSTALLATION:
A. Lift each door up and out of track (do not dis-
connect elastic tubing). Stretch elastic surgical
tubing and set doors on each side of unit.
B. Locate brackets, lights, shelves, etc. from cabinet
interior.
C. Locate shelf supports wrapped in micro foam
and install teeth end into stainless pilasters
located on interior walls. Adjust to desired
height matching right and left pairs. (images 1 &
2).
D. Locate the stainless steel shelf and install with
product stop towards the front of the cabinet.
Side flaps should overlap shelf support. Be sure
to fit shelf support tip into front slot of shelf
(images 2 & 3).
E. Plug light assembly into any receptacle of cabi-
net interior side wall (image 4).
F. Replace doors in track.
NOTE
Three lighting receptacles allow for two additional,
"optional", lighted shelves.
WARNING
Shelf mounted lighting requires a closed circuit. All
plugs must be plugged into side wall receptacles for
lights to work. If less than three shelves are installed
be sure attached caps are plugged into receptacle(s)
(image 4).
4
3
2
1
➟