Filter
Top Products
............ www.truemfg.com ............
True Food Service Equipment, Inc.
14 14
MAINTENANCE, CARE & CLEANING
LIGHT BULB REPLACEMENT
SHELF MOUNTED BULB REPLACEMENT:
WARNING
When replacing a light bulb make sure power to the
unit is either turned off or unplugged.
A. Unplug the light assembly from the receptacle
on the interior side wall. Remove shelf and
light assembly from cabinet.
B. Remove the lampshield by gently squeezing
the sides together and rotating out (image 1).
C. Remove bulb from the corded end of assembly
by holding the bulb and gently pulling up on
spring loaded lampholder which will allow
enough clearance to remove bulb (image 2).
NOTE
All spring loaded lampholders are located on the
left side of the cabinet as you face the front.
NOTE
Please be aware of your local ordinances for dis-
posal of old florescent bulbs. These bulbs should
be disposed of in a safe and proper manner.
D. Install new bulb using spring loaded lamp-
holder.
E. Reinstall light assembly and shelf. Plug cord
into side wall receptacle.
INTERIOR TOP BULB REPLACEMENT:
WARNING
When replacing a light bulb make sure power to the
unit is either turned off or unplugged.
A. Remove the lampshield by gently squeezing
the sides together and rotating out (image 3).
B. Remove bulb by gently pushing bulb back into
spring loaded lampholder which will allow
enough clearance to remove bulb (image 4).
C. Install new bulb using spring loaded lamp-
holder.
D. Reinstall light lampshield by sliding rear "U"
channel of lampshield over metal bracket and
gently squeezing lampshield to fit front "U"
channel over front metal bracket (images 5-6).
E. Image 7 shows assembly properly installed.
4
5
6
3
2
1
➟
7
➟
➟
➟
Squeeze lampshield and
rotate out.
Remove bulb by gently
pulling up on spring
loaded lampholder.
Squeeze lampshield and
rotate out.
Remove bulb by gently pushing
bulb into spring loaded lamp-
holder.
Squeeze lampshield "U"
channel into position
over metal bracket.
lampshield "U" channel
in position over metal
bracket.
Interior top light assembly
properly installed.
➟