Filter
Top Products
15
OPERATION
FIGURE 19: Insert Smart Card
Loading a Menu from a Smart Card
Please note that once the procedure below is completed, the
old menu settings will be permanently lost.
1. Ensure the oven is in the
OVEN OFF/COOLING
DOWN
mode (page 12).
2. Enable the
LOAD MENU function:
a. Simultaneously press the
UP and DOWN
keys.
b. Enter the code 6-3-6-8 (M-E-N-U) and press
ENTER.
c. Press 9 to enable
LOAD MENU.
3. Remove the lower access panel (Figure 19).
4. Insert smart card into oven (Figure 19).
5. Press the bottom-left soft key.
6. Select
LOAD MENU FROM CARD. The menu on the smart
card will load to the oven.
7. When this process completes, the oven will beep.
Remove the smart card and reattach the lower access
panel.
Saving a Menu to a Smart Card
At some point you may be required to save your
existing menu settings to a smart card (for example, if the
control board needs to be replaced). Please note that once
the procedure below is completed, any existing menu
settings on the smart card will be permanently lost.
1. Ensure the oven is in the
OVEN OFF/COOLING
DOWN
mode (page 12).
2. Enable the
SAVE MENU function:
a. Simultaneously press the
UP and DOWN keys.
b. Enter the code 6-3-6-8 (M-E-N-U) and press
ENTER.
c. Press 9 to enable
LOAD MENU. The oven will return
to
OVEN OFF
/COOLING DOWN.
d. Simultaneously press the
UP and DOWN keys.
e. Enter the code 7-2-8-3 (S-A-V-E) and press
ENTER.
The oven will return to the
OVEN OFF
/COOLING
DOWN
screen.
3. Remove the lower access panel (Figure 19).
4. Insert smart card into oven (Figure 19).
5. Press the bottom-left soft key.
6. Select
SAVE MENU TO CARD
. The menu on the oven will
load to the smart card.
7. When this process completes, the oven will beep.
Remove the smart card and reattach the lower access
panel.