Filter
Top Products
INTRODUCTION
Congratulations on your purchase of a U-Line CLR2060 Ice Maker. A
pioneer in the field for more than 40 years, U-Line is the world’s num-
ber one manufacturer of built-in, under-counter ice making and spe-
cialty refrigeration products. U-Line dedicates 100% of its research
and development to these products. The result: U-Line leads the mar-
ket with innovation, design, depth of product line and performance.
U-Line also backs customers with a strong dealer network. U-Line’s
commitment to quality even extends to environmentally safe packaging.
U-Line products are making life more convenient in homes, businesses
and hotels around the world.
PLEASE READ all instructions completely before attempting
to install or operate the unit. All Ice Makers require a con-
nection to the water supply. Improper hook-up can result in
substantial property damage! If you are unsure of your abil-
ity to safely connect the water supply to the unit, and the
unit to the drain, consult a licensed plumber for assistance.
Once you have your unit installed, we suggest you keep this manual in
a safe place for future reference. Should any problems occur, refer to
the TROUBLESHOOTING section of this manual. This information will
help you quickly identify a problem and get it remedied. In the event you
require assistance, please contact the dealer where you purchased
your unit.
PLEASE RECORD YOUR MODEL’S INFORMATION
Whenever you call to request information or service, you will need to
know your model number and serial number. You can find this infor-
mation on the serial plate located on the inside wall of your unit and on
the product registration card.
PRODUCT REGISTRATION CARD
The package containing this manual also includes your product regis-
tration information. Warranty coverage begins at the time your ice
maker was purchased.
NOTE
Complete and mail the Product Registration Card as soon
as possible to validate the registration date. You may also
register online at www.U-LineService.com.
1
Body_UM.qxd 12/17/04 9:16 AM Page 1