Filter
Top Products
31
3. Clean the condenser coil using a brush or vacuum cleaner. Do not
touch.
4. Position the grille to align the screw holes with the cabinet.
5. Insert the grille screws and tighten being very careful not to
overtighten.
SELF CLEANING CYCLE — EVERY 6 MONTHS
To maintain operational efficiency, clean the unit every six months
(depending on water conditions more or less frequent cleaning may be
necessary). If the ice maker requires more frequent cleaning, consult
a qualified plumber to test the water quality and recommend appropri-
ate treatment.
Wear rubber gloves and safety goggles and/or
face shield when handling Ice Machine Cleaner.
Use only U-Line Ice Machine Cleaner (part number 41978).
It is a violation of Federal law to use this solution in a man-
ner inconsistent with its labeling. Use of any other cleaner
can ruin the finish of the evaporator and will void the war-
ranty. Read and understand all labels printed on the pack-
age before use.
U-Line ice machine cleaner is used to remove lime scale and other
mineral deposits. Refer to the following steps to initiate the self-
cleaning cycle.
Never use anything to force ice from the evaporator.
Damage may result.
CAUTION
CAUTION
!
WARNING
Body_UM.qxd 12/17/04 9:16 AM Page 31