Filter
Top Products
STORAGE, VACATION AND MOVING
If the unit is to be stored, moved or not used for extended periods, it
will be necessary to drain the system of water.
Electrical Shock Hazard. Disconnect power
before servicing. Before operating replace all
panels. Failure to do so can result in death or
electrical shock.
1. Disconnect power from the unit.
2. Remove ice from the storage bin.
3. Shut off water supply at the main water source.
4. Remove grille (1 screw).
5. Remove the front access panel (2 screws) (see Figure 4).
6. Disconnect the inlet and out-
let lines to the water valve
and allow them to drain (see
Figure 34).
7. Reconnect inlet and outlet
lines to the water valve.
8. Replace front access panel.
9. Replace grille.
10. Drain water from the water
trough and drain line by
removing the overflow tube
(see Figure 33).
11. Clean the ice maker and storage bin before next use.
12. Reconnect power.
!
WARNING
!
27
UL204D
WATER
INLET
WATER
OUTLET
Figure 34