Filter
Top Products
GLASS SHELF INSTALLATION
(FOR MODELS WITH GLASS SHELVES)
1. Carefully remove the shelves from inside the unit and remove the
packaging.
2. Slide the shelves onto desired ribs, making sure that the silver
edge strip is toward the front of the unit and the decorative graph-
ics are on the underside of the shelves. Make sure the shelves are
inserted fully into the unit (see Figure 12). The white edge strip
towards the rear (Models 29R and 75R only) prevents cans and
bottles from freezing against the cold evaporator.
Figure 12
UL108
10
User’s Manual