Filter
Top Products
CARE AND CLEANING
Periodic cleaning and proper maintenance will ensure efficiency, top
performance, and long life. We suggest the following:
• The interior may be cleaned with a mild detergent and warm water.
•Avoid the use of solvent cleaning agents or abrasives on the interior.
These cleansers may transmit taste to the ice cubes and food, or
damage or discolor the interior.
• The exterior may be cleaned with a mild detergent and warm water.
• The front grill should be kept free
of dust and lint to permit free air
flow to the condenser (see Figure
37). The condenser coil, located
behind the front grill, should be
cleaned three to four times each
year. Use a brush or vacuum
cleaner to remove dirt, lint and
other accumulations from the
condenser coil.
!
CAUTION
25
UL005A
Figure 37
The condenser fins are SHARP. DO NOT run hands over
condenser fins.
The solenoid valve inlet screen must be cleaned at least once each year
as follows:
1. Shut off the water at the water supply valve.
2. Remove the entire hose con-
nector from the solenoid valve.
3. Use a tooth brush to clean
sediment from the inlet screen
(see Figure 38). DO NOT
remove the screen.
4. Attach the hose connector to
the solenoid valve. Tighten con-
nector securely with a pliers.
Open the water supply valve
and check for leakage at the
hose connector.
UL123
Figure 38