Filter
Top Products
6
SELECTING AND PREPARING THE OVERLAY PANEL (DFIM MODELS)
MMiinn.. 55//88”” ((11..77 ccmm))
MMaaxx.. 33//44”” ((11..99 ccmm))
1144 33//44”” ((3377..55 ccmm))
88 1155//1166”” ((2222..77 ccmm)) TTYYPP
55 1133//1166”” ((1144..88 ccmm))
2233//3322 ““ TTYYPP
((11..88 ccmm))))
1/4” x 3/8” Deep hinge screw clearance hole. Locate and drill
using door hinge hole after the door has been aligned to the unit
and when the wood is positioned on door.
MMoouunnttiinngg ssuurrffaaccee ((nnoonn--ffaaccee)) ssiiddee
1/4” x 3/8” Deep hinge screw clearance hole. Locate and drill using door hinge hole
after the door has been aligned to the unit and when the wood is positioned on door.
MMoouunnttiinngg ssuurrffaaccee ((nnoonn--ffaaccee)) ssiiddee
MMoouunnttiinngg ssuurrffaaccee ((nnoonn--ffaaccee)) ssiiddee
1133//1166”” TTYYPP
((22..11 ccmm))
BBootthh SSiiddeess
55””
((1122..77 ccmm))
TTYYPP
1199 33//1166””
((4488..77 ccmm))
TTYYPP
PPrree--ddrriilllleedd ppiilloott hhoolleess
88 ppllaacceess
2255 55//88””
((6655..11 ccmm))
TOP
OF
DOOR