Filter
Top Products
— 6 —
F35628 (10-04)
POWER ON/OFF SWITCH
WARNING: DISCONNECT THE ELECTRICAL
POWER TO THE MACHINE AND
FOLLOW LOCKOUT / TAGOUT
PROCEDURES.
1. Remove the control panel.
2. Label and disconnect the wires to the
power ON/OFF switch.
3. Squeeze the switch retainer and slide the
switch out through the front of the control
panel.
Figure E
4. Reverse procedures to install and check
for proper operation.
INDICATOR LIGHT
WARNING: DISCONNECT THE ELECTRICAL
POWER TO THE MACHINE AND
FOLLOW LOCKOUT / TAGOUT
PROCEDURES.
1. Remove the control panel.
2. Label and disconnect the wires to the Red
indicator light.
3. Squeeze the light retainers and slide the
indicator light out through the front of the
control panel.
4. Reverse procedures to install and check
for proper operation.
THERMOSTAT
WARNING: DISCONNECT THE ELECTRICAL
POWER TO THE MACHINE AND
FOLLOW LOCKOUT / TAGOUT
PROCEDURES.
1. Remove the control panel.
2. Remove the knob.
3. Remove the two screws and two washers
securing the thermostat and thermostat
dial to the control panel, then remove the
thermostat and thermostat dial.
4. When installing a new thermostat reverse
the procedure and be sure to position the
thermostat dial with OFF at the top.
5. Check calibration. Refer to the Service
Procedures and Adjustments section of
this manual.
ON/OFF
Switch