Filter
Top Products
— 10 —
ELECTRICAL CONNECTIONS (CONVECTION OVEN ONLY)
WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE
APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL
ELECTRICAL CODES.
WARNING: DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AND FOLLOW
LOCKOUT / TAGOUT PROCEDURES.
WARNING: APPLIANCES EQUIPPED WITH A FLEXIBLE ELECTRIC SUPPLY CORD ARE
PROVIDED WITH A THREE-PRONG GROUNDING PLUG. IT IS IMPERATIVE THAT THIS
PLUG BE CONNECTED INTO A PROPERLY GROUNDED THREE-PRONG RECEPTACLE.
IF THE RECEPTACLE IS NOT THE PROPER GROUNDING TYPE, CONTACT AN
ELECTRICIAN. DO NOT REMOVE THE GROUNDING PRONG FROM THIS PLUG.
The range is designed for 120 volt power supply or optional 240 volt single phase, 15 amp, 50/60
Hz power supply.
All 120 volt ranges are supplied with a flexible electric supply cord and plug and must be plugged
into the proper receptacle before turning on gas. If the appliance is not equipped with a grounding
plug and electric supply is needed, ground the appliance by using the ground lug provided. All 240
volt electric systems are manufactured for hard wire installation connections. (Refer to the wiring
diagram shipped with this unit in instructional material packet.) An electrical diagram is attached to
the back near the motor mounting area.
Do not connect the range to electrical supply until after gas connections have been made.