Filter
Top Products
— 45 —
CONVECTION OVEN MOTOR AND DOOR SWITCH CHECK,
REPLACEMENT (Cont.)
Fig. 59
12. If the replacement motor does not include the fan rotor wheel, remove wheel from old motor for use with new motor.
To remove fan wheel, loosen (2) large stud-type nuts on rotor hub, using a
5
/16" open end wrench (Fig. 60). Pull fan
rotor wheel from motor assembly.
CAUTION: The motor hub is snugly fitted to the motor assembly shaft. Therefore, the fan wheel may require extra
drawing tension to achieve removal (Fig. 61).
Fig. 60
Fig. 61
13. Reinstall motor by reversing Steps 1 through 12.