Wells WVF-886 Ventilation Hood User Manual


 
CLEANING INSTRUCTIONS (continued)
CAUTION:
ELECTRIC SHOCK
HAZARD
Disconnect appliance from
electric power before
cleaning.
CAUTION:
HOT SURFACE
Exposed surfaces
can be hot to the touch
and may cause burns. Allow
appliance to cool before
cleaning.
IMPORTANT:
DO NOT spill or pour water
into controls, control panel,
wiring. Damage to internal
components will occur.
Damage to internal
components from water
damage is not covered by
warranty.
PREPARATION
Disconnect appliance from electric power
Allow to cool before cleaning
FREQUENCY Weekly
TOOLS
Warm water and a mild detergent
Soft clean cloth or sponge
Bristle brush
Container for disposal of grease
VENTILATOR SECTION
1. Disconnect appliance from electric power
Allow to cool before cleaning
2. Remove the grease baffle, pre-filter assembly, grease trough and
grease cup. Empty the grease trough and grease cup.
3. IMPORTANT:
Never allow PRE-FILTER or FILTER PACK to get wet.
DO NOT wash either of these two filters. Washing these filters will
ruin them and cause the appliance to shut-down.
Remove the pre-filter from the filter frame. Wash and rinse the
filter frame ONLY.
4. Wash and rinse the grease baffle, grease trough and grease cup in
a sink or dishwasher using mild detergent and warm water. Allow
to air dry.
5. Reinsert the pre-filter into the filter frame. Reinstall the pre-filter,
grease baffle, grease trough and grease cup.
Procedure is complete
20
DANGER
ELECTRIC SHOCK HAZARD
DO NOT SPRAY WATER ON OR AROUND
ELECTRICAL EQUIPMENT
DO NOT WASH FLOOR NEAR ELECTRICAL
EQUIPMENT WITH WATER SPRAY