CLEANING INSTRUCTIONS (continued)
21
PREPARATION
Disconnect appliance from electric power
Allow to cool before cleaning
FREQUENCY Weekly
TOOLS
Warm water and a mild detergent
Soft clean cloth or sponge
Bristle brush
ROLL WARMER SECTION
1. Disconnect appliance from electric power
Allow to cool before cleaning
2. Remove roll warmer drawers, drawer inserts and Humitrol racks.
3. Brush crumbs from drawer slides and interior of warmer cavity with
a bristle brush.
4. Wash and rinse the drawer inserts and Humitrol racks in a sink or
dishwasher using mild detergent and warm water. Allow to air dry.
5. Reassemble and reinstall warmer drawers.
Procedure is complete
CAUTION:
ELECTRIC SHOCK
HAZARD
Disconnect appliance from
electric power before
cleaning.
CAUTION:
HOT SURFACE
Exposed surfaces
can be hot to the touch
and may cause burns. Allow
appliance to cool before
cleaning.
IMPORTANT:
DO NOT spill or pour water
into controls, control panel,
wiring. Damage to internal
components will occur.
Damage to internal
components from water
damage is not covered by
warranty.
IMPORTANT:
DO NOT use steel wool or
metal implements to clean
drawers or cabinet surfaces.
DANGER
ELECTRIC SHOCK HAZARD
DO NOT SPRAY WATER ON OR AROUND
ELECTRICAL EQUIPMENT
DO NOT WASH FLOOR NEAR ELECTRICAL
EQUIPMENT WITH WATER SPRAY