Filter
Top Products
INSTALLATION
5
NOTE: DO NOT discard
the carton or other packing
materials until you have
inspected the appliance for
hidden damage and tested it
for proper operation.
Refer to SHIPPING DAMAGE
CLAIM PROCEDURE on the
inside front cover of this
manual.
WARNING:
RISK OF
INJURY
Installation proce-
dures must be performed by a
qualified technician with full
knowledge of all applicable
electrical and plumbing codes.
Failure can result in personal
injury and property damage.
IMPORTANT:
It is the RESPONSIBILITY
OF THE INSTALLER to
check with the AUTHORITY
HAVING JURISDICTION, in
order to verify compliance
with local codes and
ordinances for THIS
SPECIFIC EQUIPMENT
INSTALLATION.
UNPACKING & INSPECTION
Carefully remove the appliance from the carton. Remove all
protective plastic film, packing materials and accessories from the
Appliance before connecting electrical power or otherwise performing
any installation procedure.
Carefully read all instructions in this manual and the Installation
Instruction Sheet packed with the appliance before starting any
installation.
Read and understand all labels and diagrams attached to the
appliance.
Carefully account for all components and accessories before
discarding packing materials. Store all accessories in a convenient
place for later use.
COMPONENTS
3 ea. OVEN RACKS
2 ea. RACK SUPPORTS
1 ea. FAN BAFFLE
1 ea. VENT DUCT ASSEMBLY
ACCESSORIES
1 ea. LITERATURE PACKAGE
OPTIONAL ACCESSORIES
22882 Stacking and Venting Kit
SERVICE TECHNICIAN INSTALLATION NOTES
1. Installation and start up should be performed by an authorized
installation company. Installer must record installation particulars
on the CUSTOMER SERVICE DATA form on page 15 of this
manual.
2. Verify that this equipment installation is in compliance with the
specifications listed in this manual and with local code
requirements.
M273 p/n 303875 OpManual OC-1 & OC-4 Convection Ovens