Filter
Top Products
Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you use
your refrigerator. Glass shelves are strong enough
to hold bottles, milk and other heavy food items.
GLASS SHELVES ARE
HEAVY. BE CAREFUL.
To remove glass shelves:
1. Tilt up at front
2. Lift up at back.
3. Pull shelf straight out.
To replace glass shelves:
1. Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot.
Lower front of shelf to level position.
The roll-out shelf is removed the same as the
other shelves. However, it must be completely
rolled in to be removed.
To remove door shelves:
1. Lift shelf up.
2. Tip back and pull out.
To replace door shelves:
1. Insert hooks into guides on both sides.
2. Tip shelf forward and push down.
Removing freezer shelf.. .
3. Replace in reverse order.
1. Lift front slightly.
2. Lift back off supports.
LIFT THE FRONT
THEN THE BACK
Removing the freezer basket...
For proper air movement, keep the freezer bas-
ket in place when the refrigerator is operating.
To remove the basket:
1. Slide out to the stop.
2. Lift the front to clear the stop.
3. Slide out the rest of the way.
To replace the basket:
1. Place basket on the slides.
2. Make sure the wire stops clear the front of the
slides.
3. Slide basket in.
PULL TO
LIFT,
PULL AG
STOP,
\
iAIN.