Filter
Top Products
4-5
REMOVING THE WATER & ICE
DISPENSER BOARD INTERFACE
1. Unplug refrigerator or disconnect power.
2. Lift the overflow tray from the water and
ice dispenser.
3. Push down on the bottom of the front cover
housing of the water and ice dispenser,
then pull the housing out at the bottom,
and unhook it at the top (see the top photo
in the right column).
4. Disconnect the two edge connectors from
the board interface and remove the hous
-
ing assembly.
Push
Down
Pull
Out
Continued on the next page.
Overflow Tray
Board Interface Edge Connectors
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
WARNING