Filter
Top Products
4-9
REMOVING THE WATER VALVES
1. Unplug refrigerator or disconnect power.
2. Remove the six screws from the unit com-
partment cover and remove the cover.
3. Disconnect the two water outlet lines from
the water valves.
4. Disconnect the four electrical connectors
from the valve terminals. NOTE: One
valve has 3/16
ʺ terminals and the other
has 1/4
ʺ terminals so that they cannot be
reversed.
5. Remove the two 9/32ʺ hex-head screws
from the valve bracket.
6. Disconnect the two water inlet lines from
the water valves and remove the valve
assembly from the unit.
Water Outlet Lines
Blu & Wht Connectors
Brn & Blk Connectors
Water Inlet Lines
Unit Compartment Cover Screws (3 of 6)
Bracket
Screws
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
WARNING