Filter
Top Products
2
1. Once the tub has filled with hot water the motor begins to rotate forcing the water up through the
pump chamber and out through the spray arms. Two spray jets on the underside of the lower
spray arm direct water down onto the fine mesh screen of the pump housing to clear soils that
may collect there during the wash cycle.
2. As water and soils return to the lower pump area, the chopper blade grinds the particles into
smaller sizes that then pass through the perforated plate into the upper chamber of the pump.
The pump impeller causes the soil ladened water to be lifted and moved to the outer edges of
the pump chamber where they are forced into the separator. Clean water is then forced up
through the spray arms and fine mesh screen.
3. When the drain cycle begins, the drive motor changes direction. This relieves the pressure on
the two check balls, opening the drain system.
4. Water is pumped from the tub carrying soils from the separator into the drain sump of the pump.
5. Soiled water is pumped out of the dishwasher through the check valve and drain hose.
PUMP AND MOTOR OPERATION