Filter
Top Products
4
Removing Access and Outer Door Panels
1. Loosen but do not remove the two (2) toe panel screws below the access panel. Remove and
set aside the two (2) screws above the access panel.
(Fig. 2-1)
2. Remove the access panel assembly by sliding it upward to clear the loosened screws.
(Fig. 2-1)
3. Remove the two (2) screws from the bottom of the outer door panel.
(Fig. 2-1)
4. Pull the bottom of the outer door panel outward and slide it down approximately ¼” to ½”. The
panel will then be free for removal. (Fig. 2-1, inset)
5. Remove the existing door insulation. Access to the detergent and rinse aid dispensers is now
possible.
Fig. 2-1