Filter
Top Products
30
Guide to the refrigerator/freezer and ice/water dispenser control panel
Vacation
This function turns off the
refrigerator compartment if
you are going away for some
time. To activate the
function press button
(yellow LED lights up).
T° disappears from the display
and a green dot appears. To
turn on the refrigerator
compartment, press button
again.
Important:
After activating this function
remove perishable food from
the refrigerator compartment
and keep the door closed.
Freezer/
Refrigerator Door
Open Indicator
Light
The refrigerator or freezer door
symbol lights up (green LED)
when one or both of the doors
are opened.
Alarms
In the event of an alarm, the
acoustic alarm and indicator
lights are activated.
To switch off the acoustic
alarm press button .
Freezer T° alarm
The acoustic alarm will
sound and the red LED will
blink, T° disappears from
the display and two
hyphens appear.
The alarm is activated
when:
The appliance is
connected to the power
supply for the first time
or after prolonged
disuse.
The freezer
compartment T° is too
high.
The quantity of foods
loaded into the freezer
exceeds that indicated
on the data plate.
The freezer door has
been left open for a long
time.
Power failure alarm
The maximum T° reached during
a power failure blinks on the
freezer display.
The red alarm LED lights up and
the acoustic alarm sounds at the
same time.
The alarm is activated when:
A prolonged power failure
takes place, causing the
internal temperature of the
freezer to increase to values
that cannot guarantee safe
storage of food.
To disable the alarm:
Press the reset button .
The display will show the
preset temperature.
Note
Check the state of the food in
both compartments before
refreezing or using it!
Operation alarms
If the acoustic alarm sounds and
the display shows letters such as
CF, contact the Whirlpool
After-sales Service.
4gb33015.fm Page 30 Wednesday, March 10, 2004 4:02 PM