Filter
Top Products
2-4
Drain Pump System (On Some Models)
Connect the ice maker drain to your drain in
accordance with the International Plumbing
Code and any local codes and ordinances.
NOTE: If the drain hose becomes twisted and
water cannot drain, the ice maker will not oper-
ate.
Connecting the Drain
After ensuring that the drain system is ad-
equate, follow these steps to properly place
the ice maker:
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can
result in death, fi re, or electrical shock.
WARNING
WARNING
1. Plug in ice maker or reconnect power.
WARNING
WARNING
Excessive Weight Hazard
Use two or more people to move and
install ice maker.
Failure to do so can result in back or
other injury.
2. Style 1 - For gravity drain system, push
the ice maker into position so that the ice
maker drain tube is positioned over the
PVC drain reducer. Style 2 - For drain
pump system connect the drain pump
outlet hose to the drain. See “Drain Pump
System” earlier in this section.
3. Recheck the ice maker to be sure that it
is level.
4. If it is required by your local sanitation
code, seal the cabinet to the fl oor with
an approved caulking compound after
all water and electrical connections have
been made.