Whirlpool KUIA18NNJ*11 Ice Maker User Manual


 
4-16
REMOVING THE MEASURED FILL WATER VALVE
1. Unplug ice maker or disconnect power.
2. Turn water supply off to ice maker.
3. Open the ice maker door.
4. Remove the four hex-head screws from
the front panel and remove the panel.
5. Remove the two hex-head screws from
the measured ll water valve bracket.
6. Place a pan or towel under the valve to
catch water.
7. Disconnect the water inlet and outlet tub-
ing from the quick disconnect ttings on
the measured ll water valve.
Front Panel Screws
8. Disconnect the two electrical connectors
from the valve.
Bracket
Screws
Two Electrical Connectors
Outlet Tube
Inlet Tube
Measured Fill Valve
Measured Fill Valve
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
WARNING
WARNING