Filter
Top Products
4-21
REMOVING THE INTERNAL DRAIN PUMP
1. Unplug ice maker or disconnect power.
2. Remove the ice from the storage bin.
3. Disconnect the water and drain lines from
the ice maker and remove the unit from its
installation.
4. At the rear of the unit, remove the four
screws from the unit compartment cover
and remove the cover.
Unit Compartment Cover
4 Screws
5. Loosen the clamps and pull the ends of
the three water lines from the internal drain
pump.
6. Disconnect the power cord plug from the
internal drain pump.
7. Remove the two mounting screws from
the internal drain pump.
Ends Of 3 Water Lines
Screws
Power Cord Plug
8. Remove the internal drain pump from the
unit.
Internal Drain Pump
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
WARNING
WARNING