Whirlpool MH6100XY Microwave Oven User Manual


 
Timer
The microwave oven controls can be used as a kitchen timer. Use COOK at “0” Cook Power
for timing up to 99 minutes, 99 seconds. NOTE:
If all tones are removed (see page 6) the
Timer will still function, but the Timer slgnal will not sound.
DO THIS...
THIS HAPPENS...
1. Touch COOK.
2. Touch Number Pads for the
mlnutes and seconds you want.
The COOK Indicator Light will come on
and the Display will show four 0’s.
The Display will show what numbers
you touched
In the order you
touched them.
This example shows
1 minute, 45 seconds.
The COOK POWER Indicator Light will
come on and the Display will show
“P-HI:’
3.
Touch COOK POWER.
4. Touch “0” Number Pad.
The Display will show “P-01’ This tells
you that the oven will
be operating
at
5. Touch START.
NOTE: If you hear the fan
start when you touch
START, you have not set
the Cook Power properly.
Touch CANCEL and start
over.
The COOK Indicator Light will stay
on to show that the timer is running.
The COOK POWER Indicator Light
will be on.
The Display counts down to show you
how much time is left. During the count-
down the oven will be dark and the
fan will be off. For 2 of every10 seconds
the Display will show “P-O” to tell you
that the oven is operating at 0% power.
When the set time ends,“End” will show
on the Display and 4 beeps will sound.
(You can stop the beeping by opening
the door or by touching CANCEL.)
“End” will remain on the Display and a
reminder tone will sound every 60
seconds until the door is opened or
CANCEL is touched. The Display will
then show the time of day.
18