Filter
Top Products
I I
4. To replace grease filters,
slide filter In the frame slot on
the front of the openlng.
Rush filter upward and push
to the rear to lock into place.
8. Slide a new charcoal fflter
Into place. The filter should
rest at the angle shown.
5. To replace charcoal filter:
remove the vent cover
mounting screws.
6. Tip the cover forward, then
Ilft out to remove.
9. Slide the bottom of the
vent cover into place.
Rush the top until it snaps
into place. Replace the
mounting screws.
10. Turn the power back on
at the main power supply
7. Llft the back of the
charcoal filter. Slide the
filter straight out.
11. DO not operate the hood
without the filters In place.
20