Filter
Top Products
m
.a
2.
Touch COOK.
The COOK Indicator Light will come on
and the Display will show four 0’s.
3. Touch Number Pads for
cooklng time you want.
The display will show the numbers YOU
touched
In the order you touched
them.
The example shows 1 minute,
30 seconds.
m
* .
4.
Touch START.
d
CDUd
QWll
The oven will automatically cook at
HIGH Cook Power.
The COOK Indicator Light will stay on
to show that fhe oven is cooking in the
cycle.
The Display counts down the time to
show how much cooklng time is left.
When the cooklng tlme ends, “End” will
show on the Display and 4 beeps will
sound. (You can stop the beeplng by
opening the door or by touching
CANCEL.) “End” will remain on the
Display and a remlnder tone will
sound every 60 seconds (to remind
you that food Is left In the oven) unfll
the door Is opened or CANCEL Is
touched. The Display will then show
the tlme of day.
Changing the Cooking Time
Cooking time can be changed any time before touching START or during the cycle:
1. Touch COOK.
2. Touch numbers for the new ttme.
3. Touch START.
Cook will continue cooking for the new time.
Cooking at Lower Cook Powers
For best results, some recipes call for lower Cook Powers. The lower the Cook Power, the
slower the cooking. Each Number Pad also stands for a different percentage of Cook Power.
Many recipes in your MICRO MENUS@ Cookbook tell you, by number, which Cook Power to use.
Recipes in other books and magazines may tell you by name (HI, MED, LO, etc.) or
percentage (lo%, 50%, 80%. etc.).
The following chart gives the percentage of Cook Power each Number Pad stands for, and
Cook Power name usually used.
aufomafic 100% of full power HIGH
4 = 40% of full power
9 = 90% of full power
3 = 30% of full power MEDLOW
8 = 80% of full power
2 = 20% of full power
7 = 70% of full power MED-HIGH
1 = 10% of full power LOW
6 = 60% of full power
0 = no power (fan and light will be offj
8
5 = 50% of full power MED