Filter
Top Products
-.
Replacing the Cooktop and Oven Lights
Fire Hazard
Use only candelabra base bulbs, 30-watl maxlmum. Failure to do so
could result In tire.
The Cooktop light:
Electrical Shock Hazard
Turn off power at maln
power supply before CB-
placlng the IlgM bulb.
Failure to do so could re-
sult In electrical shock.
The Oven light:
1
Electrical Shock Hazard
Turn off power at maln
power supply before re-
placlng the IlgM bulb.
Failure to do so could re-
sult In electrical shock.
5. Lift up the bulb holder.
2. Remove the bulb cover
mounting screws.
3. We recommend replaclng
bulb(s) with candelabra-
base 30-watt bulb(s) avail-
able from your authorized
WhirlpoolSM service com-
pany (Part No. 4158432).
2.
Remove the vent cover
mounting screws.
3. Tii;;Ft;;;E;vard, then
4. Remove bulb holder
mounting screw.
6. We recommend replacing
bulb with candelabra-base
30-watt bulb available from
your authorized Whirlpool”
service company (Part No.
4158432).
7. Replace the bulb holder
and mounting screw.
8. Slide the top of the vent
cover into place. Push the
bottom until it snaps into
place. Replace the mount-
ing screws. Turn the power
back on at main power
SUPPlY.
21