Whirlpool MW7500XW Microwave Oven User Manual


 
II
m
. . .
0
A
8.
9.
10.
Select a Cook Power. To cook at HIGH power,
skip to Step IO. To select another Cook Power,
touch COOK POWER. The COOK POWER
Indicator Light will come on and the Display will
show “P-HI”. This shows the oven is prepro-
grammed to cook at full (HIGH) power.
Touch a Number Pad for the Cook Power you
want in the second cycle. The Display will show
what you touched. This example shows you
touched Number Pad 4 for 40% of full power.
Touch START. When you touch START, the
COOK 1 Indicator Light will stay on while the
oven is cooking in the first cycle. The COOK
POWER Indicator Light will be on if you are
using a Cook Power other than HIGH. All other
Indicator Lights will go off.
The Display counts down the cooking time to
show how much time is left in the first cycle.
For 2 of every 10 seconds, the Display will
show the Cook Power you selected, if you are
using a Cook Power other than HIGH.
You will hear 2 beeps at the end of the Cook 1
cycle. You can either open the door to check,
stir or turn over the food, etc., or you can let the
oven start the next cycle. If you do open the
door, touch START after closing the door to
restart the oven.
The COOK 2 Indicator Light will be on during
the second cycle. The COOK POWER Indicator
Light will also be on If you are using a Cook
Power other than HIGH.
The Display counts down the time to show
how much time is left in the second cycle.
For 2 of every 10 seconds, the Display will
show the Cook Power you selected, if you are
using a Cook Power other than HIGH.
When the Cook 2 cycle ends, “End” will show
on the Display and 4 beeps will sound. (You can
stop the beeping by opening the door or by
touching CANCEL.) “End” will remain on the
Display and a reminder tone will sound every 30
seconds (to remind you that food is left in the
oven) until the door is opened or CANCEL is
touched. The Display will then show the time of
day.
21