Filter
Top Products
Using Your Microwave Oven
Continued
Touch the Number Pad for the Cook Power you
want. The Display will show what you touched.
This example shows you touched Number Pad
6 for 60% of full power.
Touch START. The PROBE TEMP and COOK
POWER Indicator Lights will stay on.
The Display will show “COOL” to show the
food is less than 90°F. As the food cooks, the
Display will show the internal temperature of the
food for every 5°F increase.
For 2 of every 10 seconds, the Display will
show the Cook Power you selected, if you are
using a Cook Power other than HIGH.
When the probe senses the temperature you
selected, the oven will shut off. “End” will show
on the Display and 4 beeps will sound. (You can
stop the beeping by opening the door or by
touching CANCEL.) “End” will remain on the
Display and a reminder tone will sound every 30
seconds (to remind you that food is left in the
oven) until the door is opened or CANCEL is
touched. The Display will then show the time of
day.
NOTE: “ERR” will be displayed after START is
touched if an incorrect temperature has been
selected (less than 90°F and more than 200°F).
NOTE: Some foods are started using a timed
(COOK) cycle and finished by using the tempera-
ture (PROBE TEMP) cycle. You can set PROBE
TEMP to follow COOK 1 or 2 to avoid the need to
reset the oven halfway through the cycle. PROBE
TEMP can be programmed with the Temperature
Probe out. The oven will pause between COOK
1 or 2 and PROBE TEMP. “PROB” will show on the
Display to remind you to plug in the probe.
Changing the temperature setting
When using the Temperature Probe, PROBE
TEMP settings can be changed any time before
touching START or during oven operation.
1. Touch PROBE TEMP.
2. Touch Number Pads for the new temperature.
3. Touch START. The oven will continue cooking
to the new temperature. If the new temperature
is lower than the temperature of the food, the
oven will shut off.
24