Filter
Top Products
When the set time ends, “End” will show on the
Display and 4 beeps will sound. (You can stop the
beeping by opening the door or by touching
CANCEL.) “End” will remain on the Display and a
reminder tone will sound every 30 seconds (to
remind you that the Minute Timer has ended) until
the door is opened or CANCEL is touched. The
Display will then show the time of day.
NOTE: Opening the oven door stops the count-
down. Close the door and touch START to continue
the timing countdown.
Using delayed start
The microwave oven can be set to start automati-
cally at a later time. Use the Cook 1 cycle at “0”
Cook Power to delay the start of the Cook 2 cycle
for up to 99 minutes, 99 seconds.
1.
2.
3.
4.
5.
6.
7.
Put in food and close the door. (See WARNING
on page 32.)
Touch COOK 1. The COOK 1 Indicator Light will
come on and the Display will show four “0”s.
Touch Number Pads for the length of delay you
want. The Display will show the numbers you
touched in the order you touched them. This
example shows 60 minutes (1 hour).
Touch COOK POWER. The COOK POWER
Indicator Light will come on and the Display will
show “P-HI”.
Touch the “0” Number Pad. The Display will
show “P-O”. This tells you that the oven will be
operating at 0% power.
Touch COOK 2. The COOK 2 Indicator Light will
come on and the Display will show four “0”s.
Touch in the cooking time and Cook Power.
31