Filter
Top Products
12.
Touch COOK POWER. (If
you want the high Cook
Power, skip to step 14.)
The COOK POWER Indicator Light
will come on and the Display
will show “P-HI”. This shows
the oven is preprogrammed to
cook at full (HIGH) power.
13. Touch a Number Pad for
/
the Cook Power you want in
the third cycle.
The Display will show what you
touched. This example shows you
touched Number pad 8 for 80% of
full power.
14.
Touch START.
When you touch START, the COOK 1
Indicator Light will stay on
while the oven is cooking in
the first cycle. The COOK POWER
Indicator Light will be on if
you are using a Cook Power
other than high. All other
Indicator Lights will go off.
The Display
counts
down the
cooking time to show how much
time is left in the first cycle.
for 2 of every IO seconds, the
Display will show the Cook
Power you selected, if you are
using a Cook Power other than
high.
You will hear 2 beeps at the
end of Cook 1. You can either
open the door to check, stir or
turn the food, etc., or you can
let the oven start the next
cycle. If you do open the door,
touch START after closing the
door to restart the oven.
The COOK 2 Indicator Light will
be on during the second cycle.
The COCK POWER Indicator Light
will also be on if you are using
a Cook Power other than high.
The Display counts down the time
the time to show how much time is
left in the second cycle.
For 2 of every 10 seconds, the
Display will show the Cook
Power you selected, if you are
using a Cook Power other than
high.
15
cantinued on next
Daae