Filter
Top Products
Using your microwave oven
Microwave oven controls
There are three parts in the control
SeCtiOn:
When you first plug in the oven, the Display will
-The Digital Display/Clock. and Indicator Lights
show 88:88. If, after you set the Clock [page 61, the
-Command Pads
Display again shows all B’s, it means your elec-
- Number Pads
tricity was off for a while. Reset the Clock.
Instructions for each control are covered on the
following pages. Read them carefully.
Di ital display/clock and
in 61 icator lights
When you are not
using the microwave
oven, this is an accu-
rate digital clock.
When you are using
the microwave oven,
this displays time
settings and shows
you what Number Pads you touched.
Command pads
Touch Command
Pads to tell the micro-
wave oven what to
do and in what order.
A few examples:
-CLOCK SET tells the
- START tells the oven
to start.
Each Command Pad (except START and CANCEL]
lights an Indicator Light on the digital display.
The Indicator Light comes on when you touch the
Command Pad.
While the oven is running, an Indicator Light (or
lights will be on to show what the oven is doing.
Number Pads
Once you’ve touched
a Command Pad to
tell the oven what you
pI q m ~~Y~:~~~~~sto
tell it...
m
q
m -aCookPower.
- a time
a food
temperature.