Filter
Top Products
Caring For Your Cooktop
Burn and Electrical Shock Hazard
Make sure all controls are off and the
cooktop is cool before cleaning. Failure to
do so can result in burns or electrical
shock.
Control panel and knobs
1. Turn control knobs to the OFF position.
2. Pull control knobs straight off.
3. Use warm, soapy water or spray glass cleaner
and a soft cloth to wipe the control panel.
Rinse and wipe dry with a soft cloth.
4. Wash control knobs in warm, soapy water.
Rinse well and dry with a soft cloth. Do not
soak.
5. Replace control knobs by pushing them firmly
into place.
NOTE: When cleaning, never use steel wool,
abrasives, or commercial oven cleaners which
may damage the finish. After cleaning, make sure
all control knobs point to the OFF position.
Coil surface units and
reflector bowls
Removing
.
Burn and Electrical Shock Hazard
Make sure all surface units are OFF before
removing surface units and reflector
bowls. Failure to do so can result in burns
or electrical shock.
1. Lift the edge of the unit opposite the recep-
tacle, just enough to clear the reflector bowl.
2. Pull the surface unit straight away from the
receptacle.
12