Filter
Top Products
Vent system
Filter
Fan’
Personal Injury Hazard
l
Disconnect the electrical supply before
servicing the cooktop. The wall recep-
tacle is located in the cabinet beneath the
cooktop.
l
Turn fan and cooktop controls to OFF
before cleaning the vent system. The vent
fan system turns on automatically when
the grill is used. Do not put hand in vent
box when fan or controls are on.
Failure to follow these instructions could
result in personal injury.
1. Remove the vent cover and wash in warm,
soapy water or wipe with a damp cloth. Do not
use metal scrubbing pads or abrasive
cleansers.
2. Reach into vent box and lift a filter out. Turn
slightly to pass filter through vent hole. Repeat
for second filter. Wash in warm, soapy water
or dishwasher.
3. Wipe in and around the vent box with a damp
cloth. Spills should be cleaned up with a
sponge.
4. Replace the filters. Be sure the filters rest at
an angle over the exhaust fan.
5. Replace the vent cover.
NOTE: Filters must be in place for the fan to
operate properly. Replacement filters can be
ordered from a WhirlpoolSM service company or
dealer. Order Part Number 786235 (one pair).
In the event you are unable to obtain the name
of a local authorized Whirlpool service company,
call Whirlpool COOL-LINEm service assistance,
TOLL-FREE 1-800-253-l 301.
19