Filter
Top Products
Cleaning the vent system
Personal Injury Hazard
l Disconnect the electrical supply
before servicing the cooktop. The wall
receptacle is located in the cabinet
beneath the cooktop.
*Turn fan and cooktop controls to OFF
before cleaning the vent system. The
vent fan system turns on automati-
cally when the grill is used. Do not put
hand in vent box when fan or controls
are on.
Failure to follow these instructions
could result in personal injury.
1.
Remove
the vent cover and
wash
in
warm, soapy water or
wipe
with a
sponge.
Do not use metal scrubbing
pads or abrasive cleansers.
2.
Reach
into vent box and
lift
a filter out.
Turn
slightly to pass filter through vent
hole.
Repeat
for second filter.
Wash
in
warm, soapy water or dishwasher.
3. Wipe
in and around the vent box with a
sponge.
Clean up
spills with a sponge.
4. Replace
the filters. Be
sure
the filters
rest at an angle over the exhaust fan.
5. Replace
the vent cover.
NOTE: Filters must be in place for the fan to
operate properly. Replacement filters can be
ordered from a WhirlpoolSM service company
or dealer. Order Part Number 786235 (one
pair).
If you are unable to obtain the name of a
local authorized Whirlpool service company,
call Whirlpool Consumer Assistance Center
TOLL-FREE
l-800-253-1 301.
Filter
25