Filter
Top Products
PROBLEM
I.---- _,
POSSIBLE CAUSE
-
I Venting
: Exhaust fan is not turned on.
: results are not
; Vent filters are not clean or
: what you
expected
I are not in place.
! Vent duct or outside opening
1 is blocked.
; There is a draft in room
i where cooktop is installed.
; Meat is not well trimmed.
: Cooking
~ The cooktop is not level.
f results are not /
/ what you
i expected
! The recipe has never been
i tested or is not from a
,
/ reliable source.
I
: The pan used is not the type
I
I or size recommended in the
I
1 recipe.
j Cooking utensil does not fit
! ) the surface unit being used.
I
SOLUTION
---~
Turn on exhaust fan.
See page 2.5 for cleaning and re-
placement instructions.
Unblock vent duct or outside opening.
Close door or window causing draft.
Trim off all meat fat.
Level cooktop. (See Installation
Instructions.)
Use only tested recipes from a
reliable source.
Refer to a reliable cookbook for
recommended pan type and size.
Pan should be the same size or
slightly larger than surface unit being
used.
28