Filter
Top Products
Pans should be the same size or larger than the elements to prevent boilovers and hot handles.
Only
use
pans
wllh fluI
bottoms.
Flat bottoms allow maximum contact between the pans and
the elements for fast, even cooking. Pans with uneven bottoms or raised patterns on the bottom
are not suitable. Flatness of a pan can be checked by placing an edge of a ruler across it. There
should not be space between the ruler edge and the bottom of the pan.
DO NOT USE trlvefs,
woks wtlh skirts, or canners wlfh concave bottoms. See lllustmflons below.
Changing cooktop modules
The cooktop modules will work on either side of the cooktop.
NOTE: The toll element
module on the rlghf ride of the RC8920XRH cooktop Is not removable.
Coil element, solid element and smoothtop modules
NOTE: On the RC8920XRH cooktop, these opflonal modules will only fli In the lefl side.
To remove, lift slightly
2. With both hands, pull
3.
by the handle.
Lift out and set aside.
module toward
vou to
1.
To replace, line up the
terminal
2. Push terminal into place
3. Lower the front with the
with the
until it’s plugged in.
handle.
receptacle.