Filter
Top Products
Using your cooktop
‘1
-
2
4
-
-
Surtace
Unlt
lndlcators
Left
Rear
Surface
Unlt
Control
Grill
, Control or
LeR Front
Surtace
Unlt
Control
Right
Rear
Surface
Unlt
Control
Rlght
Flont
Surface
Unlt
Control
or Grill
Control
, Slgnal
Light
Vent
’ System
Control
1. Using
the control knobs
Surface unit indicators:
Surface unit indicators show the surface unit
or module operated by that control knob.
l
The solid dot shows the sur-
face unit that is controlled by
that knob.
l
The solid box shows that a
module, such as a grill, can
be controlled by that knob.
l
The solid dot inside the box
shows the surface unit con-
trolled if a surface unit mod-
ule is installed.
PUSH IN
Turn to
settlng.
Control knobs must be pushed in before
turning them to a setting. There is a click at HI.
LO and OFF, but they can be set anywhere
between HI and OFF.
The signal light will glow when any surface
unit or module is ON. Be sure the light is OFF
when you are not cooking.
NOTE: The grill and griddle modules are oper-
ated with the front control knob In the section
being used.