Filter
Top Products
Coil elements and reflector bowls
Removlng
1.
Be sure controls are OFF and elements are
COOL.
2. Lift the edge of the coil element opposite the
receptacle just enough to clear the reflector
bowl.
3. Pull the coil element straight away from the
receptacle.
4. Lift out the reflector bowl
Replaclng
1.
Be sure toll elements are OFF.
2. Line up opening
in the reflector bowl with the
coil element receptacle.
3. Hold the coil element as level as possible
with the terminal just started into the
receptacle.
4. While pushing the coil element terminal into
the receptacle, lift a little on the edge of the
unit nearest the receptacle.
5. When the terminal is pushed into the recep-
tacle as far as it will go, the coil element will flt
into the reflector bowl.
Reflector bowls reflect heat back to
the utensils on the coil elements. They
also help catch spills. When they are
kept clean, they reflect heat better and
look new longer.
If a reflector bowl gets discolored,
some of the utensils used may not be flat
enough. Or some may be too large for
the coil element. In either case, some of
the heat that is meant to go into or
around a utensil goes down and heats
the reflector bowl. This extra heat can
discolor it.