Filter
Top Products
OVEN TEMPERATURE CONTROL OVEN SIGNAL LIGHT
OVEN SELECTOR
&EN
LIGHT SWITCH
RIGHT REAR/-
CONTROL KNOB
Using the surface units
RIGHT FRONT’
CONTROL KNOB
Control knobs must be pushed in
before fuming them to a setting. They
can be set anywhere between HI
and OFF.
Surface Unit Indicators
The solid dot in the surface unit
indicator shows which surface unit
is turned on by that knob.
Signal Light
One of the signal lights will glow
when a surface unit is on.
Solid Element
Surface Units
Solid element surface units are made of heavy cast-iron to provide even
cooking. Each surface unit has a built-in protective limiter. The limiter senses
uneven cooking temperatures and automatically reduces the heat setting.
The limiter will sense uneven heat when a pan boils dry, when a pan does not
have a flat bottom, or when a pan is removed and the surface unit is left on.
Solid elements hold heat longer than conventional surface units. For best
cooking results, use a high setting for only a very short period of time. Then use
a lower setting to complete the cooking. You may want to turn the solid
element OFF a few minutes before you are finished cooking.
CALCCION:Collddem~dayhottoral~Wme.Donot~lheHl~ng
for long perloda of ilme or have pans on hot elemenh when oooklng k
dona.Bumedfoodanddamaaatolheoookwanoouldrestdf.