Whirlpool RF3300W Range User Manual


 
The Continuous-Cleaning Oven
Standard oven walls are coated with smooth porcelain, Your Continuous-
Cleaning oven walls are coated with a special, rougher porcelain. A fat
spatter beads up on the smooth surface, but spreads out on the rougher
surface. The bead of fat on the smooth surface chars and turns black. The
spread-out fat on the rough surface
gradually
burns away at
medium to
hlgh baklng temperatures
so the oven can return to a presentably clean
condition.
Using Foil
Using foll on the oven bottom is recommended to catch sugar and starchy
spills from pies and casseroles.
It must be used properly.
Cut foil from a roll of
heavy-duty 18-inch (45 cm) aluminum foil, or buy a foil kit (Part No. 241430)
from your Whirlpool Appliance dealer.
Burn, Electrlcal Shock and Product Damage Hazard
l
Make sure all controls are OFF and the oven Is cool before using foil.
Failure to do so can result In burns or electrlcal shock.
l
Do not let toll touch the bake element. It could damage the element.
Make sure foil Is flat on the bottom and away from the bake element.
1.
Turn off all controls.
2. Lift the cool bake element
slightly
to llf? the feet off the oven
bottom.
3. Slide the foll under the bake ele-
ment.
Make sure the foil is cen-
tered and long enough to start up
both sides and without wrinkles.
For proper baking,
lower the
bake element so all feet rest sol-
Idly on the toll.