Filter
Top Products
3. Hold the surface unit as level as possible with
the terminal just started into the receptade.
Push the surface unit terminal into the
receptacle.
4. When terminal is pushed into the receptade
as far as it will go, push down the edge of the
surface unit opposite the receptacle. The
element hokfdown clip will keep the surface
unit from moving around.
NOTE: Refledor howls reflect heat back to the
utensils on the surface units. They also help
catch spills. When they are kept clean, they
reflect heat better and look new longer.
lf a reflector howl gets discolored, some of the
utensils may not be flat enough, or some may be
too large for the surface unit. In either case,
some of the heat that’s meant to go into or
around a utensil goes down and heats the
reflector howl. This extra heat can discolor it.
20